C Frame High Speed Stamping Press

·High rigidity cast-iron frame,eliminate the internal stress,ensure the high precision in a long run.
·3 post guides feature, minimize the friction,compulsivelubrication,minimize the heat-deformation.
·Dynamic balancing system balance the shake of the crank and slide,when the machine under high speed work condition.Ensure the precision.
·Manual mould height adjustment,used with mould height indicator and oil pressure lock device,facilitate the adjustment.
·Man-machine interface(electrical cam + rotary encoder) easy for operation a ccurate.
·All the operation including in the LCD,all the error will show itself.
C-type high-speed punch machine - 80T
Scope: C-type high-speed punch is widely used in precision electronics, communications, computers, household appliances, vehicles (cars, motorcycles, bicycles), auto parts, motor stator and other small precision parts such as stamping and forming.
1. high-strength cast iron frame, the overall frame structure is strong, the stress to eliminate, to ensure long-term precision, material stability accuracy, stamping accuracy of 0.015mm or less, even up to 0.01mm, vertical accuracy of up to 1.2 wire, Can be 1300 times / min. Most suitable for continuous stamping production.
2. the use of C-type mechanical institutions, guided movement with three round-oriented structure, accurate accuracy, stability, easy detection and maintenance. Crankshaft and motor linkage using bearing structure, configuration reverse side dynamic balance system, configure the mold high display, configure the oil lock system, configure the forced lubrication system.
3. the reverse load dynamic balance device, set the weight on the mold, can offset the inertia of reciprocating motion to balance the punch in the high-speed operation of the vibration, and reduce the punch when the noise.
4. eccentric shaft design, the strength is much larger than the general crankshaft design, can withstand greater capacity output and not easy to deformation.
5. the central guide column and slider guide column, are coated with nickel-chromium alloy steel, after quenching and tempering processing and precision machining.
6. Japan original NSK bearing configuration, to ensure that the machine in the high-speed stamping in the same accuracy, longer life.
7.strict dynamic dead point detection, "warm constant speed", "constant temperature constant speed", "temperature rise acceleration" and 100 million continuous high-speed performance test.
8. computer numerical monitoring system, panel operation is convenient, is the best equipped with press automation.
9. hydraulic slider locking device to maintain the same mold height, to ensure product accuracy requirements.
10. manual mold height adjustment, equipped with high mold indicator, precision 0.1mm.