Double Head Hydraulic Pipe Bending Machine
Product Description
This machine is specially designed for decoiling, straightening, chipless cutting and bending coil copper tubes into long U shape, used in air conditioners and heat exchangers.
This machine is comprised of decoiler, straightening & cutting device, bending & tube-returning device, unloading device, hydraulic system, pneumatic system and PLC control system.
Technical Parameters
| Item | Data |
| Suitable Copper Tube Material | TP2 |
| Suitable Copper Tube Reel Size | Max. Weight 180kgMax. OD: 1100mm; ID: 130mm |
| Suitable Copper Tube Diameter | 7mm; 9.52mm |
| Bending Radius | For 7mm Tube: R21mm; For 9.52mm Tube: R25.4mm |
| Copper Tube Numbers | Max. 6 Pieces Simultaneously |
| Max. Copper Tube Length | 275~1700mm |
| Production Speed | L≤300, < 8s;L≤800, < 12s;
L≤1600, < 20s; |
| Length Error | L<800, ±0.5mm; L≥800mm, ±0.8mm |
| Length Error Between Two Ends | Less Than 1.0mm |
| Center Distance Error Between Two Ends | Less Than ±0.1mm(Within 14mm Away From Loop) |
| Tube ID At Cutting Ends | For 7mm Tube: >5.6mm; For 9.52mm Tube: >8mm |
| Straightness Error | Curvature ≤3mm @L=1000mm |
| Flattening Ratio At Loop Area | Less Than 15% |
| Thinning Ratio At Loop Area | Less Than 30% |
| Finishing Quality | No Wrinkle, Scratch, Crack, Dimple, Bulge, Burr |
| Total Power | ≤15KW |
| Workshop Area Needed | 16.12m X 3m X 3.29m |
| Compressed Air Source | 0.4-0.6MPa |
| Hydraulic Pressure | 7MPa |
Main Configuration
-- PLC & HMI: Mitsubishi from Japan
-- Servo motor and driver: Mitsubishi from Japan
-- Circuit breaker: FUJI from Taiwan
-- Buttons: SCHNEIDER from China
-- Pneumatic components: AIRTAC from Taiwan
-- Hydraulic components: Famous brands from Taiwan
Finished Product
Picture Display
Option
Assembly Workshop
Detecting Device
Delivery
Write your message here and send it to us
